|Min. Order / Reference FOB Price||10000 Sets||CN¥705.69 / Set|
|Supply Ability:||No accurate information|
|Payments:||Visa,On line bank payment,Pat later|
|Place of Origin:||Shandong, China|
Greenhouse machine gear motor used for shading is widely used in mechanisms that transmit power and motion. It uses a gear speed converter to reduce the number of motor revolutions to the desired number of revolutions and get a larger torque mechanism. Greenhouse machine gear motor used for shading is generally used for low-speed and high-torque transmission equipment. The motor, internal combustion engine, or other high-speed running power is reduced through the gear with a small number of teeth on the input shaft of the gear reducer to achieve the deceleration the goal of.
Greenhouse machine gear motor used for shading can be used in the greenhouse window opening, curtain opening system, modern breeding industry window opening, ventilation system, and other occasions. The machine has its own limit mechanism, which can control the machine forward and reverse travel within a certain range.
The protection grade of this equipment is IP55, so no rain or spray water can be directly washed on the motor on the machine, and protective measures should be added on such occasions.
Greenhouse machine gear motor used for shading should be installed and debugged by professionals. The instructions for limit control are on the inside of the lid.
After the mechanical gear motor is installed, loosen one oil plug screw above the oil surface according to different installation positions to facilitate ventilation during machine operation, which can effectively reduce the occurrence of oil leakage.
The electric control system for controlling the reducer should be protected by the phase sequence. Normally running machines may cause limited failure and machine damage due to phase sequence changes.
The machine has been lubricated with oil at the factory and should be replaced after one year of use. Protective measures should be taken during the long-term shutdown and should be carefully checked before starting again before use.
When installing the mechanical gear motor, the coaxiality of the transmission system should be controlled within 2 mm. The transmission system should rotate flexibly, without jamming, and be fully lubricated.
Greenhouse machine gear motor used for shading External shading mainly refers to covering the shading net outside the greenhouse. This method directly shields the solar radiation outside the greenhouse, which can effectively reduce the temperature in the greenhouse. At the same time, the outer shading system is better able to move so that it can provide enough sunlight in rainy weather.
Greenhouse machine gear motor used for shading The inner shading is a shading system installed inside the greenhouse and above the crops, usually with a lighter shading net. Obviously, this kind of indoor shading system can not really reduce the indoor temperature, but only effectively prevents direct sunlight from crops and prevents crops from being burned. Usually, the inner shading system is used in conjunction with the outer shading system. In addition to cooling in summer, the inner shading system can also play a role in energy-saving and heat preservation in winter. It can be used to cool the greenhouse in summer, which can improve the growth environment of crops in many ways and ensure the reasonable role of sunlight. Allow sunlight to enter the greenhouse in a diffuse manner to avoid burns caused by strong crop light. Reduce the greenhouse temperature by 5-7 degrees. Anti-ultraviolet, anti-hail, shading, and cooling. According to the different crops planted, choose different shades of curtains. In summer, it reflects sunlight and reduces radiation while effectively cooling down. Insulation and energy saving in winter, reducing the overall operating cost of the greenhouse It is the preferred supporting product for modern greenhouses.