Plastic film greenhouse roll up motor for ventilation, abbreviated as roller shutter machine, is agricultural machinery and equipment used to automatically roll up grass curtains in greenhouses. According to the placement position, it is divided into the front type and rear type. According to the power source, it is divided into electric and manual. The most commonly used is the electric roller shutter, which generally uses 220V or 380V AC power. The emergence of the roller shutter machine has greatly promoted the mechanization development of the greenhouse industry. Its main engine is the nature of the reducer, and the five-axis all-steel shell is commonly used. The application of the all-steel shell greatly improves the service life and safety of the product. Sex, to protect the personal safety and economic interests of vegetable farmers.
Plastic film greenhouse roll up motor for ventilation is commonly used as a combination of the electric and manual rolling machine with a remote control device, which effectively avoids personal injury caused by illegal operation and the impact of power failure on the temperature of the greenhouse. The mechanical principle is to use a reducer to reduce the motor speed and increase the torque. Common reducers are gear reduction and harmonic reduction. The gear reduction mechanism is relatively bulky and heavy, and has a large power consumption, while the harmonic reduction mechanism is small, low power consumption, and high reliability. The emergence of roller shutters has greatly promoted the mechanization of the greenhouse industry and reduced the labor burden of farmers.
Plastic film greenhouse roll up motor for ventilation has a motor, because this is the main power, which is also the main part of the roller shutter machine. In addition, winter is also the season of the high incidence of the use of roller shutters. Therefore, we must focus on maintenance in the use of roller shutters. Especially at this time, please do better maintenance of roller shutters.
The greenhouse roll-up motor is a very important part of the rolling machine. It is very important to choose the motor of the roller blind. Generally speaking, the daily working hours of the roller shutter machine are mainly in the morning and evening, and the working time is less than ten minutes, so there is no need to consider the heating and heating of the motor. The load is uniformly increased and the speed is stable, so the vibration and speed change of the motor can be ignored.
Generally, the factors that affect the life of the motor are power and speed, and sometimes environmental factors. The technology requires that the output power of the motor is 1.1 kilowatts, and if the speed reducer is reduced, the speed is 1.6 revolutions per minute. So try to choose a lower speed motor. Plastic film greenhouse rolls up motor for ventilation is agricultural machinery and equipment used to automatically roll up the grass curtains in the greenhouse.